





The Improved Outer Tactical Vest (IOTV) is an improved version of the earlier Outer Tactical Vest (OTV) form of the Interceptor Body armour, as fielded by the US Army. The Deltoid and Auxiliary Protector System (DAPS) components, ESAPI (Enhanced Small Arms Protective Insert), Enhanced Side Ballistic Inserts (ESBI), and the OTV's groin protector are all compatible with the IOTV.
Here are the content lists:
1. Why IOTV is better than traditional OTV?
2. What is the background of the improved outer tactical vest?
3. What is the effectiveness of the IOTV?
The OTV design was deemed insufficient and weak in several areas, prompting the creation and deployment of the IOTV. Point Blank Body armour, BAE Systems, KDH Defense Systems, Protective Products Enterprises, UNICOR, and Creative Apparel Associates are actively producing the IOTV. From mid-2007 forward, the IOTV first saw battle with US Army ground combat units, and it is still the basic body armour type deployed by regular US Army ground combat troops overseas.
While the Interceptor Body armour and the Outer Tactical Vest were thought to be fairly effective, others questioned if they were the greatest feasible armour solution for US military forces. The controversy surrounding Dragon Skin, which was created by the now-defunct Pinnacle armour, heightened the argument. Various assertions appeared that Dragon Skin was more successful at shielding soldiers than the then-standard issue Interceptor body armour system, with independent studies and reports appearing to back these claims, prompting various congressional members to request more investigation. In response, the military released public testing results that revealed widespread flaws in the Dragon Skin armour's testing. Dragon Skin was never widely adopted, and several of the Outer Tactical Vest's identified flaws, such as quality of protection and modularity, were rectified in the Improved Outer Tactical Vest and E-SAPI plates.
The Improved Outer Tactical Vest is an advance over earlier US body armour systems, with the Vietnam War-era fragmentation vest limited to fragmentation protection, the PASGT vest limited to pistol bullets, and the prior Outer Tactical Vest unable to stop armour-piercing shots.
The Army has continued to develop the IOTV with additional features in response to troop input on the effectiveness of the armour system, with Generation III including a more intuitive rapid release system and the new Operational Camouflage Pattern (OCP). Body armour conversion kits have been given at a lesser cost to bring earlier Generation armour sets up to newer requirements, rather than constructing fully new IOTV armour sets.
Litai (Quanzhou) Bags Corporation, which is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. Whether selecting a current product from our catalogue or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. If you have any needs or questions about the tactical vest, please contact us.
Everyone agrees that it is necessary to get a rifle bag so let’s look at a brief history of the rifle bag and find out what has changed over the years.
Here are the content lists:
1. It all began in the old west.
2. Today’s Soft Rifle bags.
3. Soft rifle bags offer some distinct advantages.
In the 1830s, the first full-length rifle bags developed, mostly to protect the rifle.
They were sewed across the main seam and ornamented with fringes by American Indians from a single piece of deer or elk hide that covered the entire weapon. Early frontiersmen exchanged for these protective bags because they recognized the importance of their rifles.
While these early bags performed a fine job of securing the rifles, they did nothing to aid Plainsmen in their horseback transit. They were obliged to balance them on the saddle pommel until someone devised a leather sleeve called a horn loop that was fastened to the saddle horn and allowed the rifle to be inserted muzzle down.
The rifle could now travel with the saddle horn, but it had lost much of its protection. The saddle scabbard was not invented until after the Civil War, about 1870, making transit and protection conceivable.
The rifle could be carried with the butt forward thanks to the full-length leather sheath linked to the pommel and the back of the saddle. Anyone who has watched reruns of riflesmoke, Wagon Train, or any other TV western from the 1950s and 1960s has seen a saddle scabbard in some form.
The more things change, the more they stay the same, as someone once said. It's the same with rifle casings. Even if you aren't hunting buffalo on the western plains, you still need the same features in your rifle bag: protection and portability.
Rifle owners are passionate about their firearms and the activities they participate in. They want to be able to attend their favorite events while also ensuring that their prized rifles are safe.
The main advantage of soft rifle bags is that they are lightweight and easy to carry, which is something that every shooting competitor appreciates. For those rainy days on the range, a soft bag's water resistance is another benefit.
One of the knocks on soft bags in the past was that they couldn't secure a rifle as well as a hard bag. Let's face it, you don't want your weapon to move around in its bag. However, there are now twin soft bags with three interior straps, such as ours, that you may customize to keep your weapon secured and secure.
There are also tactical rifle bags that allow you to use barrel and rifle retention methods to secure your rifle's buttstock. Our rifle bag is one of the few on the market with a removable divider that also functions as a rifle mat.
Overall, soft bags have progressed significantly. They give the versatility of zippered compartments to carry ammo, magazines, cleaning equipment, and even storage for your small weapons, in addition to providing more secure transit for your rifle.
A good rifle bag can keep your weapon protected while offering all the convenient features you need. Litai (Quanzhou) Bags Corp., Ltd. is a professional rifle bag manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at choly@lqcompany.com or phone at 86-15260869531.
As part of its effort to upgrade the equipment supplied to its soldiers, the Canadian Army is looking for a new tactical assault vest/load carriage system.
Army officials told Esprit de Corps that a Request for Proposals will be released to the industry sometime this fall.
Here are the content lists:
1.What are the current tactical assault vest design and drawbacks?
2.What’s the bidding document Canadian Army officials will have on the new tactical assault vest?
3.What about the Canadian Army’s results of its testing of a new camouflage pattern?
The current tactical assault vest was developed in the 1990s based on the experiences of the Canadian Armed Forces in the Balkans. That design anticipated soldiers would uniformly carry minimum equipment, however, it is widely known that the present vest is disliked by troops, who often respond by purchasing their similar equipment.
Before departing his role as Director of Soldier Systems for the Canadian Army's Directorate of Land Requirements in July, Lt.-Col. Ray Corby openly admitted that the present vest is no longer enough to suit soldiers' needs. According to Army officials, polls done by Defence Research and Development Canada suggest that the assault vest is at the top of the list of equipment that soldiers want to see replaced. The lack of modularity in the existing vest is cited by the majority of soldiers as the primary source of their dissatisfaction.
According to Canadian Army officials, the Requests for Proposals for the new load-carrying system would be specially worded to stimulate sector inventiveness. The bid package will specify what troops must do, what they must carry, and where they must operate, as well as give industry latitude in determining how new technology might fulfill those responsibilities. The new equipment is planned to be delivered in 2022.
Small amounts of equipment might be acquired at the start, with adjustments made later, according to Corby. “We want to show that as an Army, we can rapidly and efficiently trial and choose equipment so that we can take advantage of industry improvements in the future,” he said. “We are not searching for a solution that will last 20 to 30 years. Every five years or so, we'd want a taste of the greatest for those who need to keep an edge on the battlefield.”
New load carriage system selection trials are slated for next summer, with a cross-section of soldiers from a variety of Canadian Army trades evaluating industry prototypes. According to Army officials, the idea is to create a modular system that will allow soldiers to customize their equipment based on their employment and body type. Aside from modularity, another important issue to consider is "load management," which refers to the total weight of all the equipment a soldier must carry. Overburdening soldiers has the unintended consequence of slowing them down.
The results of the Canadian Army's testing of a new camouflage design, on the other hand, have yet to be released. In September 2019, troops from the 2nd Canadian Mechanized Brigade Group in Petawawa began testing a new disruptive pattern. The soldiers were largely from the 3rd Battalion, Royal Canadian Regiment. The bulk of soldiers wore the “Prototype “J” pattern.
According to the Canadian Army, the trial lasted about six months and finished in February 2020, producing a wealth of relevant data. In addition, Prototype J is still worn by members of the Battalion. Uniforms, a soft field cap, helmet covers, and fragmentation vest covers were supplied to the troops participating in the Prototype J camouflage tests.
Uninhabited aerial vehicles were utilized in some of the tests to assess how far the new pattern could be observed from such drones.
According to the Army, a final decision on the new camouflage will be made no later than 2022. In 2027, the new camouflage uniform will be fully implemented.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical assault vest manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
It wouldn't be a new year without new equipment, and the Army will have plenty in 2022. Soldiers may be able to get their hands on new vehicles, weapons, and uniforms before the end of the year. Some of the equipment has already been delivered to Army troops and will continue to be delivered in 2022. This year, all of the other equipment will be spanking new. Here are the three new military products to see in 2022:
1. Army Combat Fitness Test Equipment.
2. Tactical Digital Media Kits.
3. Infantry Squad Vehicle.
The Kentucky National Guard was the first to receive equipment for the Army's new Combat Fitness Test in December 2019. More than 1,500 of the sets, which comprise bumper plates, barbells, medicine balls, and a nylon sled with straps, have been issued by the Army since then.
According to Vandermaarel, the Army is fielding this equipment in a regionalized manner, with units in the Southeast receiving it first. The Southwest will be fielded in February, followed by overseas in March, the Northeast in February and March, the Midwest in March and April, and the West in April and May. Vandermaarel estimates that fielding will be completed by mid-May.
The Tactical Digital Media Kit, which comprises audiovisual acquisition and editing technology, is designed specifically for public affairs soldiers. 270 kits have been sent to priority units so far. By the end of the fiscal year 2021, an additional 327 kits will be deployed to priority units. There are also plans for a one-time purchase of 560 kits for National Guard use utilizing National Guard and reserve equipment dollars, according to Vandermaarel.
The Tactical Digital Media kits, according to Vandermaarel, are an advance over the old video and still photo kits.
“The MTRS Inc II provides the warfighter with a standoff ability to locate, identify and clear landmines, unexploded ordnance and improvised explosive devices in the path of maneuvering Army or joint forces,” Higgins said in an email. “It also provides [Chemical, Biological, Radiological and Nuclear] soldiers with the capability to employ CBRN sensors from a distance.”
According to an Army News Service report from August of last year, the Infantry Squad Vehicle will be deployed in 2021. The new nine-soldier vehicle was set to undergo its first phase of testing in late 2019 at Aberdeen Test Center in Maryland. Fort Bragg, North Carolina, would have hosted the second round of testing. According to the Army News Service story, 649 vehicles were planned to be purchased following testing and selecting a vendor. Before the deadline, Army Public Affairs officers were unable to confirm whether the scheduled testing took place or what the test results were.
Litai (Quanzhou) Bags Corp., Ltd. is a professional military-related products manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.