





The Improved Outer Tactical Vest (IOTV) is an improved version of the earlier Outer Tactical Vest (OTV) form of the Interceptor Body armour, as fielded by the US Army. The Deltoid and Auxiliary Protector System (DAPS) components, ESAPI (Enhanced Small Arms Protective Insert), Enhanced Side Ballistic Inserts (ESBI), and the OTV's groin protector are all compatible with the IOTV.
Here are the content lists:
1. Why IOTV is better than traditional OTV?
2. What is the background of the improved outer tactical vest?
3. What is the effectiveness of the IOTV?
The OTV design was deemed insufficient and weak in several areas, prompting the creation and deployment of the IOTV. Point Blank Body armour, BAE Systems, KDH Defense Systems, Protective Products Enterprises, UNICOR, and Creative Apparel Associates are actively producing the IOTV. From mid-2007 forward, the IOTV first saw battle with US Army ground combat units, and it is still the basic body armour type deployed by regular US Army ground combat troops overseas.
While the Interceptor Body armour and the Outer Tactical Vest were thought to be fairly effective, others questioned if they were the greatest feasible armour solution for US military forces. The controversy surrounding Dragon Skin, which was created by the now-defunct Pinnacle armour, heightened the argument. Various assertions appeared that Dragon Skin was more successful at shielding soldiers than the then-standard issue Interceptor body armour system, with independent studies and reports appearing to back these claims, prompting various congressional members to request more investigation. In response, the military released public testing results that revealed widespread flaws in the Dragon Skin armour's testing. Dragon Skin was never widely adopted, and several of the Outer Tactical Vest's identified flaws, such as quality of protection and modularity, were rectified in the Improved Outer Tactical Vest and E-SAPI plates.
The Improved Outer Tactical Vest is an advance over earlier US body armour systems, with the Vietnam War-era fragmentation vest limited to fragmentation protection, the PASGT vest limited to pistol bullets, and the prior Outer Tactical Vest unable to stop armour-piercing shots.
The Army has continued to develop the IOTV with additional features in response to troop input on the effectiveness of the armour system, with Generation III including a more intuitive rapid release system and the new Operational Camouflage Pattern (OCP). Body armour conversion kits have been given at a lesser cost to bring earlier Generation armour sets up to newer requirements, rather than constructing fully new IOTV armour sets.
Litai (Quanzhou) Bags Corporation, which is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. Whether selecting a current product from our catalogue or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. If you have any needs or questions about the tactical vest, please contact us.
The decision you must make is whether you choose a soft or hard bag.
It doesn't appear to be a difficult decision at first glance. However, like with other decisions, the more you consider it, the more perplexed you become. There are lots of gray regions to consider; it's not all black and white. And it's not always a right or bad decision.
First and foremost, consider if you truly need a rifle bag. That's the easiest part of the decision-making process because the answer is a resounding "Yes" unless you want to keep your rifle in the gun cabinet to collect dust.
After all, if you didn't enjoy long-range target shooting, you wouldn't own a rifle. Many even hosts the rare 3-Gun Shooting Competition, which requires you to travel with your rifle and guns.
Here are the content lists:
1. How many rifles will you carry?
2. If you’re flying, you’ll need to choose a hard rifle bag.
3. Safety First, Always.
You must first ask yourself, "How many rifles will I be carrying?" Because many hard bags don't enable you to carry numerous weapons, this is crucial. The majority of soft bags are twin soft rifle bags, allowing you to carry two or even three guns.
So, if your hard bag doesn't let you customize it to carry numerous rifles, you might want to consider a soft tactical rifle bag.
The majority of your shooting tournaments will be accessible by car. There will come a moment when a major event may entice you to travel to a faraway state such as Montana. And if you reside in North Carolina, you probably won't want to go those 1800 miles.
According to the Transportation Security Administration (TSA), your weapon must be transported as checked baggage only in a secured hard-sided container.
The unloaded firearm must be completely secured in the TSA-approved hard bag. That implies it must be locked, and you will be the only one who knows the key or combination.
Many individuals choose Pelican bags for their hard bags, however, I like Patriot bags hard bags.
The exterior of sturdy gun bags is usually made of aluminum or plastic. Outside forces are better protected by hard bags, which have an inside foam layer that keeps the weapon from moving around.
If you're flying, these are crucial considerations, but hard bags are heavier and bulkier than soft bags, making transportation harder. They're also more pricey.
If you have to fly with your rifle, be sure to follow the TSA's tight criteria and purchase a sturdy bag that matches their specifications.
However, bring a lightweight, soft bag with you to the tournament. It makes no sense to carry that extra weight off the plane once you get to your destination.
You should be able to lock your rifle bag regardless of whether it is soft or rigid. Hard bags normally have a locking system, and soft bags usually have padlocked zippers.
A secured bag keeps minors away from your guns and makes it more difficult for burglars to steal them. Litai (Quanzhou) Bags Corp., Ltd. is a professional gun bag manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at choly@lqcompany.com or phone at 86-15260869531.
As the last article has talked about three rules that need to be paid attention to, we will continue to talk about the rest two rules of military backpack.
Here are the content lists:
1. A ten percent incline reduces your speed by half.
2. Slowing down slows you down twice as much as speeding up.
3. Soldiers' real-life experiences using military backpack in the United States army.
The speed of a person is strongly influenced by their grade. The term "grade" refers to the amount of elevation or decrease in the terrain. At a 10% grade, for example, you'll gain 1 foot for every 10 feet you move ahead. In angle terms, ten percent equals 5.74 degrees. When you're humping up a 5.74-degree angle mile after mile, it doesn't feel like much. You'll know how difficult it is because you'll move twice as slowly with a given load over it as you would on flat terrain. That last part—with a specific load—is crucial. Whether you're hauling 45 lbs. or 80 lbs., a 10% grade will limit your speed in half.
I don't think you'll make it up the other side of the hill in time. You're not going to succeed. You'll only be able to make up half of the time. Why don't you make up for what you lose by running downhill? Forces of braking To stay in control while you fall, you must use your quads to break your pace. The more braking required, the steeper the downhill. If you do a lot of up and down labour, this extra strain on your muscles will damage your uphill performance even more.
A US soldier, Robert Schumacher, with twenty years experience in the army said that “my rucksack was full of all kinds of lightweight gear that gradually got heavier and heavier as the Army came up with ever more lightweight gear for me to carry, The average rucksack is supposed to weigh no more than a certain percentage of your body weight for you to be able to move and fight. Mission requirements too often say otherwise. When you figure in the weight of your LCE, (military for load-carrying equipment or the vest you see soldiers wearing), plus your weapon, uniform, binoculars, night vision device, and everything else, the weight becomes quite remarkable, The heaviest rucksack that I carried weighed 145 lbs, (I remember every painful step, as I remembered that I could have signed up for the Navy). Even the combat load, (what you carrying into combat and fight with), can easily weigh 60 lbs.) The idea is to carry only what you need into combat, but the fear of facing the unexpected keeps you putting things in that you probably will never need - but if you do need it….”
Litai (Quanzhou) Bags Corp., Ltd. is a professional military backpack manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
In comparison to civilian products of wide use, military-technical systems are a distinctive category of material commodities whose life is defined by a period of peace of a certain evolution. Following are three main points of the life cycle of a military product:
1. The introduction of the life cycle of a military product.
2. The concept of a military product’s life cycle.
3. The military approach to the life-cycle concept of a product.
The unique properties of military products, their exorbitant price, and their societal utility determine this particular progression of the life cycle. The necessity to cover the security needs that these reinvigorated technical systems can supply under an economically financially beneficial balance is essentially related to the "repeatability" of the life cycle to another beneficiary. These “spiral” lifecycles of military-oriented products are a variation that certain reputable material goods makers have adopted (from the luxury vehicle sector) with great economic results as much as feasible chosen for marketing reasons. Although this approach may not appear to be very advantageous at first glance, it can be a quick and beneficial solution for the second user who can benefit from the capabilities of a reliable and verified technical system that has been upgraded to the current level of global performance in the short and medium-term. This method is ideal for countries with a moderate economic power but significant security needs, such as those imposed by NATO membership, as well as the current complex geopolitical scenario.
Product Life Cycle (PLC) refers to a product's average lifespan and indicates the length of time a product/brand of a product spends on the market, beginning with its introduction and ending with its discontinuation (these two phases can be identified with ease). Many authors compare the concept to biology, where products are born, grow, develop, and eventually get older and die.
According to Rey, Martn-Gil, and Velasco (2004), there are two major conceptions about a product's life cycle. The first (and most common) claim is that a product has four stages in its life cycle:
1. release;
2. the growth;
3. maturity;
4. decline.
According to the American perspective of integrated logistics support for military-technical systems, as outlined in the Support Operations Handbook, special-purpose items go through the following life-cycle stages:
1. the definition phase (examination of the concept);
2. demonstration – validation stage;
3. the design and testing stage;
4. the production and deployment phase;
5. operation (operation) and support (maintenance) stage;
6. phase-out stage
A detailed approach to this lifecycle of military goods is presented by Siteanu, E., (2005) who enumerated fifteen stages:
1. analyzing (determining) the necessity of manufacturing a technical product, determining the destination, formulating the functions and establishing the requirements (specification);
2. definition of the technical product and functional analysis, the establishment of the criteria and resources of research, design and development;
3. analysis of probable variants, possible realizations and choosing the optimal ones;
4. preliminary design;
5. design documentation design;
6. detailed design of the product;
7. manufacture of the prototype (functional model);
8. prototype testing and its assessment;
9. preparation of the manufacturing;
10. realization of the zero series, experimentation under the required conditions and approval;
11. serial production and delivery to the beneficiaries;
12. the exploitation of the products to the beneficiaries and the maintenance activities;
13. performing improvement (modernization) activities;
14. removal from service;
15. revitalization (optional).
Litai (Quanzhou) Bags Corp., Ltd. is a professional military-related products manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.