





Tactical clothing originated as a military requirement and has since evolved into a popular choice of attire for people looking to play the EDC card or simply look the part. Tactical gear has been modified for civilian usage, from backpacks to boots, and at ever-higher quality levels.
Here is the content list:
1. Boots
2. Body armour
3. Tactical backpacks
Operators require a high level of mobility. Boots are one of the most crucial commodities for mobile providers.
A well-designed and well-built pair of tactical boots allow the wearer to cross a variety of terrain with little strain and risk of injury. A good pair of boots will always steer you in the proper path, whether you're attacking or retreating.
Proper boots would have the following characteristics:
• Lightweight design
• Durability
• Waterproofing
• Breathability
The increasing and publicly publicized prevalence of active shooter scenarios around the world can be credited with raising everyone's awareness of the critical function body armour plays in saving lives.
Modern body armour is so adaptable that it may be put into a plate carrier or slid into special pockets on tactical shirts and vests.
The ability of body armour to stop specific types of bullets is graded. The National Institute of Justice in the United States assigns the scores (NIJ). The NIJ rating system has five levels.
• LEVEL IIA Low-velocity 9mm and.40 calibre pistol bullets can be stopped.
• LEVEL II protects against bullets of larger calibre and velocity, ranging from 9mm to.357 magnums.
• LEVEL IIIA Stops shots with a calibre of up to.44 magnum. This is a thicker, heavier degree of body armour with a long-lasting feel. Kevlar shields and other non-wearable bulletproof tools commonly use Level IIIA armour.
• LEVEL III Capable of stopping rifle shots, including 7.62 mm bullets from an AK-47. Level III armour is significantly thicker and heavier than Level II armour since it is often comprised of hard plates.
• LEVEL IV Stops armour-piercing bullets up to.30 calibre from penetrating. Thick hard plates designed to mount to a carrier are typically used to achieve this capability.
• LEVEL IV armour is so hefty that only operators with appropriate strength and endurance can utilize it. It's designed for war or tense gunfights.
In recent years, the market for tactical backpacks for both operators and civilians has exploded.
From MOLLE webbing to moral-patch Velcro, these backpacks have a lot in common, no matter who they're sold to. Tactical backpacks, for example, virtually always include straps for carrying guns.
They're also usually equipped with covert zipper pockets for concealed weaponry.
These bags all have the same deep organizational capacity, which means they can hold a lot of things. They may also have expansion capabilities and storage areas for water bladders and body armour plates.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical gear manufacturer that provides both OEM and ODM orders. We have our overseas warehouse, and our business model has shifted from a single product maker to providing system integration services, resulting in a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
As part of its effort to upgrade the equipment supplied to its soldiers, the Canadian Army is looking for a new tactical assault vest/load carriage system.
Army officials told Esprit de Corps that a Request for Proposals will be released to the industry sometime this fall.
Here are the content lists:
1.What are the current tactical assault vest design and drawbacks?
2.What’s the bidding document Canadian Army officials will have on the new tactical assault vest?
3.What about the Canadian Army’s results of its testing of a new camouflage pattern?
The current tactical assault vest was developed in the 1990s based on the experiences of the Canadian Armed Forces in the Balkans. That design anticipated soldiers would uniformly carry minimum equipment, however, it is widely known that the present vest is disliked by troops, who often respond by purchasing their similar equipment.
Before departing his role as Director of Soldier Systems for the Canadian Army's Directorate of Land Requirements in July, Lt.-Col. Ray Corby openly admitted that the present vest is no longer enough to suit soldiers' needs. According to Army officials, polls done by Defence Research and Development Canada suggest that the assault vest is at the top of the list of equipment that soldiers want to see replaced. The lack of modularity in the existing vest is cited by the majority of soldiers as the primary source of their dissatisfaction.
According to Canadian Army officials, the Requests for Proposals for the new load-carrying system would be specially worded to stimulate sector inventiveness. The bid package will specify what troops must do, what they must carry, and where they must operate, as well as give industry latitude in determining how new technology might fulfill those responsibilities. The new equipment is planned to be delivered in 2022.
Small amounts of equipment might be acquired at the start, with adjustments made later, according to Corby. “We want to show that as an Army, we can rapidly and efficiently trial and choose equipment so that we can take advantage of industry improvements in the future,” he said. “We are not searching for a solution that will last 20 to 30 years. Every five years or so, we'd want a taste of the greatest for those who need to keep an edge on the battlefield.”
New load carriage system selection trials are slated for next summer, with a cross-section of soldiers from a variety of Canadian Army trades evaluating industry prototypes. According to Army officials, the idea is to create a modular system that will allow soldiers to customize their equipment based on their employment and body type. Aside from modularity, another important issue to consider is "load management," which refers to the total weight of all the equipment a soldier must carry. Overburdening soldiers has the unintended consequence of slowing them down.
The results of the Canadian Army's testing of a new camouflage design, on the other hand, have yet to be released. In September 2019, troops from the 2nd Canadian Mechanized Brigade Group in Petawawa began testing a new disruptive pattern. The soldiers were largely from the 3rd Battalion, Royal Canadian Regiment. The bulk of soldiers wore the “Prototype “J” pattern.
According to the Canadian Army, the trial lasted about six months and finished in February 2020, producing a wealth of relevant data. In addition, Prototype J is still worn by members of the Battalion. Uniforms, a soft field cap, helmet covers, and fragmentation vest covers were supplied to the troops participating in the Prototype J camouflage tests.
Uninhabited aerial vehicles were utilized in some of the tests to assess how far the new pattern could be observed from such drones.
According to the Army, a final decision on the new camouflage will be made no later than 2022. In 2027, the new camouflage uniform will be fully implemented.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical assault vest manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
Tactical gear has seen a surge of innovation in the last century, from sophisticated backpacks to tech-enhanced body armor. The desire for innovative items is still growing. In fact, it appears to be increasing. One of the reasons why so many people buy tactical gear only for work purposes is because of this rise in interest. It's interesting to watch the industry develop.
Here is the content list:
1. When did the tactical gear industry first originate?
2. The rise in popularity of military tactical.
3. The future of tactical gear.
Tactical gear has a long history, dating back over a thousand years in the sense that armor and utility garments are considered tactical gear because of their uses in war. Military and tactical equipment have a long history together. However, when someone discusses tactical clothes these days, it's unlikely that they're referring to full chain-mail.
The genuine rise in popularity of civilian tactical gear began in the late twentieth century and has continued to this day. People used to dress tactically with a certain objective in mind. However, clothing inspired by law enforcement and military personnel has become a mainstay in high street design in the last decade.
The majority of tactical gear fans aren't looking to make a fashion statement. Indeed, I'd go so far as to claim that the high street may have jumped on a trend in order to cash in on camo designs and multi-pocket jackets. Surprisingly, the origins of civilian tactical gear can be traced back to a similar approach.
Demand for tactical gear continues to rise as more individuals become aware of its numerous applications. Even the most ordinary folks can appreciate goods like durable flashlights. Tactical gear is no longer a niche sector, thanks to advances in
technology and durability. Having the right tools can benefit almost everyone.
Marketers are well aware of this and have profited from it for years. There are a plethora of businesses that take pride in producing next-level gear for the many practical demands we confront in daily life. A simple Google search of ‘tactical clothing’ will give you with a seemingly limitless supply of sites all vying for your business.
As I previously stated, one of the things that fascinates me about tactical gear is how it continues to expand and improve over time. The world of tactical gear, like the world of technology, continues to expand and innovate in new and interesting ways. They frequently go together. As a result, anticipating what tactical gear may look like in the future is interesting, especially as so many tools improve with technological improvements.
It's impossible to predict what will be available for civilian use, I acknowledge. However, keeping a watch on the military's new equipment is one approach to predict what might hit the tactical gear market.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical gear manufacturer that provides both OEM and ODM orders. We have our overseas warehouse, and our business model has shifted from a single product maker to providing system integration services, resulting in a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
The US military spends tens of millions of dollars each year on the research and development of new military products. Every day, new inventions are brought to life through military research and development, from the behind-the-scenes labour that tracks what's needed, to the science that makes the military product feasible, to prototypes and field testing.
What we don't realize, though, is how many ordinary things began this way. The military products didn't invent these things, but that doesn't mean they stayed in the military. Many objects made it to widespread use, and the origins of many of them have since been forgotten.
Take a look at these common military goods that were brought to life by tax dollars and military research:
1. The sanitary napkins were invented in 1914.
2. In the 1930s, the popular Ray-Ban Aviator Sunglasses was invented.
3. Duct Tape and Super Glue were invented in 1942.
1. The sanitary napkins were invented in 1914.
Let us pay special tribute to pioneer women. Before the 1920s, the majority of what was available was homemade. Cotton pads were first introduced during WWI as military product, but a cotton shortage prompted the Kimberly-Clark Company to develop cellucotton, an absorbent material produced from wood pulp. Originally designed for bandages, nurses in the Red Cross recognized their usefulness and began using them during Aunt Flo's visits.
Kimberly-Clark began producing and marketing cellucotton sanitary napkins after the war ended. Because of the nature of the product's use, many businesses refused to stock it, but sanitary napkins became readily available to the general public instead of only military product within a few years.
2. In the 1930s, the popular Ray-Ban Aviator Sunglasses was invented.
As military pilots reached unprecedented altitudes, they realized they needed military product -- sunglasses to protect them from the strong glare. The US Army Air Corps hired Bausch & Lomb to design aviator goggles with their trademark shape and lens material that successfully filtered out the light.
However, the product was not excluded; in 1937, they re-branded a pair of sunglasses as “Ray-Bans” (banning the rays) and sold them to civilians.
By the end of the 1930s, as military products, all soldiers were issued a pair, and the civilian populace could purchase them as well.
3.Duct Tape and Super Glue were invented in 1942.
Duct Tape was another WWII invention of military product. Johnson & Johnson Co. developed it in response to a request from the military for an adhesive that could resist harsh environments. Their first invention was dubbed "duck tape" because it was waterproof. It was frequently utilized by civilians after the war, most commonly to seal ducts. It was renamed Duct Tape and rebranded in silver to match modern heating and air conditioning systems.
During World War II, Super Glue made its appearance as well. When Eastman Kodak was looking for a compound to utilize on plastic rifle sights, they came up with this compound. It was created by chance and was found to be too sticky to use.
It was rediscovered nearly a decade later and discovered to have enormous commercial potential. It was first sold to the general public in 1958, and physicians used it to swiftly seal open wounds during the Vietnam War.
Litai (Quanzhou) Bags Corp., Ltd. is a professional military-related products manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at choly@lqcompany.com or phone at 86-15260869531.