





The decision you must make is whether you choose a soft or hard bag.
It doesn't appear to be a difficult decision at first glance. However, like with other decisions, the more you consider it, the more perplexed you become. There are lots of gray regions to consider; it's not all black and white. And it's not always a right or bad decision.
First and foremost, consider if you truly need a rifle bag. That's the easiest part of the decision-making process because the answer is a resounding "Yes" unless you want to keep your rifle in the gun cabinet to collect dust.
After all, if you didn't enjoy long-range target shooting, you wouldn't own a rifle. Many even hosts the rare 3-Gun Shooting Competition, which requires you to travel with your rifle and guns.
Here are the content lists:
1. How many rifles will you carry?
2. If you’re flying, you’ll need to choose a hard rifle bag.
3. Safety First, Always.
You must first ask yourself, "How many rifles will I be carrying?" Because many hard bags don't enable you to carry numerous weapons, this is crucial. The majority of soft bags are twin soft rifle bags, allowing you to carry two or even three guns.
So, if your hard bag doesn't let you customize it to carry numerous rifles, you might want to consider a soft tactical rifle bag.
The majority of your shooting tournaments will be accessible by car. There will come a moment when a major event may entice you to travel to a faraway state such as Montana. And if you reside in North Carolina, you probably won't want to go those 1800 miles.
According to the Transportation Security Administration (TSA), your weapon must be transported as checked baggage only in a secured hard-sided container.
The unloaded firearm must be completely secured in the TSA-approved hard bag. That implies it must be locked, and you will be the only one who knows the key or combination.
Many individuals choose Pelican bags for their hard bags, however, I like Patriot bags hard bags.
The exterior of sturdy gun bags is usually made of aluminum or plastic. Outside forces are better protected by hard bags, which have an inside foam layer that keeps the weapon from moving around.
If you're flying, these are crucial considerations, but hard bags are heavier and bulkier than soft bags, making transportation harder. They're also more pricey.
If you have to fly with your rifle, be sure to follow the TSA's tight criteria and purchase a sturdy bag that matches their specifications.
However, bring a lightweight, soft bag with you to the tournament. It makes no sense to carry that extra weight off the plane once you get to your destination.
You should be able to lock your rifle bag regardless of whether it is soft or rigid. Hard bags normally have a locking system, and soft bags usually have padlocked zippers.
A secured bag keeps minors away from your guns and makes it more difficult for burglars to steal them. Litai (Quanzhou) Bags Corp., Ltd. is a professional gun bag manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at choly@lqcompany.com or phone at 86-15260869531.
The Chinese People's Liberation Army (PLA) Xinjiang Military Command, which is stationed in China's high-altitude western areas, has confirmed that it has received three new advanced weaponry systems in the last week, including armoured vehicles and artillery pieces, as analysts predicted on Sunday.
Here is the content list:
1. A new type of armoured assault vehicle has been revealed.
2. Newly delivered new-type, four-wheeled self-propelled howitzer.
3. New self-propelled heavy rocket launchers have gone into service
A video news website linked with the PLA stated on Sunday that dozens of a new type of armoured assault vehicle had recently entered duty with a PLA Xinjiang Military Command unit deployed in a snowy plateau region at an elevation of more than 4,500 meters.
According to the clip, the eight-wheeled armoured vehicles come in a variety of configurations, including those with big calibre rifled equipment, autocannons, machine guns, and howitzer systems.
A new-type, four-wheeled self-propelled howitzer was recently handed to a group that recently completed its first live-fire target practice deep in the Karakorum Mountains at an altitude of 4,500 meters, according to China Central Television (CCTV).
In addition, a unit deployed in a snow-covered region at an elevation of more than 5,200 meters recently received a batch of new self-propelled heavy rocket launchers that are highly mobile, fast-reacting, highly accurate, very deadly, and jamming-resistant, according to a separate CCTV report on May 8.
According to Shanghai-based news website, the Type 08 armoured vehicle, a 122mm-calibre self-propelled howitzer that incorporates technologies from the PCL-181 155mm-calibre self-propelled howitzer, and the PHL-03 long-range multiple rocket launcher systems are the three new military equipment systems.
According to a Chinese military affairs analyst who requested anonymity, the PLA's high-altitude troops are gaining enhanced mobility and firepower by upgrading their arsenal with the latest military equipment systems, allowing them to better fulfill their missions in safeguarding the country's sovereignty and territorial integrity.
Observers say the PLA Xinjiang Military Command has been commissioning a variety of modern weaponry during the last year. The command got the first batch of newly designed Type 15 light tanks in early 2021, according to analysts, which excel at rapid reaction fighting in plateau regions.
Official reports also reveal other new military equipment systems, such as the PLC-181 howitzer and third-generation Mengshi assault vehicles, according to eastday.com. According to analysts, these are developing a complete, modern ground warfare system that is particularly important for plateau battles.
Litai (Quanzhou) Bags Corp., Ltd. is a professional military-related equipment manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
As part of its effort to upgrade the equipment supplied to its soldiers, the Canadian Army is looking for a new tactical assault vest/load carriage system.
Army officials told Esprit de Corps that a Request for Proposals will be released to the industry sometime this fall.
Here are the content lists:
1.What are the current tactical assault vest design and drawbacks?
2.What’s the bidding document Canadian Army officials will have on the new tactical assault vest?
3.What about the Canadian Army’s results of its testing of a new camouflage pattern?
The current tactical assault vest was developed in the 1990s based on the experiences of the Canadian Armed Forces in the Balkans. That design anticipated soldiers would uniformly carry minimum equipment, however, it is widely known that the present vest is disliked by troops, who often respond by purchasing their similar equipment.
Before departing his role as Director of Soldier Systems for the Canadian Army's Directorate of Land Requirements in July, Lt.-Col. Ray Corby openly admitted that the present vest is no longer enough to suit soldiers' needs. According to Army officials, polls done by Defence Research and Development Canada suggest that the assault vest is at the top of the list of equipment that soldiers want to see replaced. The lack of modularity in the existing vest is cited by the majority of soldiers as the primary source of their dissatisfaction.
According to Canadian Army officials, the Requests for Proposals for the new load-carrying system would be specially worded to stimulate sector inventiveness. The bid package will specify what troops must do, what they must carry, and where they must operate, as well as give industry latitude in determining how new technology might fulfill those responsibilities. The new equipment is planned to be delivered in 2022.
Small amounts of equipment might be acquired at the start, with adjustments made later, according to Corby. “We want to show that as an Army, we can rapidly and efficiently trial and choose equipment so that we can take advantage of industry improvements in the future,” he said. “We are not searching for a solution that will last 20 to 30 years. Every five years or so, we'd want a taste of the greatest for those who need to keep an edge on the battlefield.”
New load carriage system selection trials are slated for next summer, with a cross-section of soldiers from a variety of Canadian Army trades evaluating industry prototypes. According to Army officials, the idea is to create a modular system that will allow soldiers to customize their equipment based on their employment and body type. Aside from modularity, another important issue to consider is "load management," which refers to the total weight of all the equipment a soldier must carry. Overburdening soldiers has the unintended consequence of slowing them down.
The results of the Canadian Army's testing of a new camouflage design, on the other hand, have yet to be released. In September 2019, troops from the 2nd Canadian Mechanized Brigade Group in Petawawa began testing a new disruptive pattern. The soldiers were largely from the 3rd Battalion, Royal Canadian Regiment. The bulk of soldiers wore the “Prototype “J” pattern.
According to the Canadian Army, the trial lasted about six months and finished in February 2020, producing a wealth of relevant data. In addition, Prototype J is still worn by members of the Battalion. Uniforms, a soft field cap, helmet covers, and fragmentation vest covers were supplied to the troops participating in the Prototype J camouflage tests.
Uninhabited aerial vehicles were utilized in some of the tests to assess how far the new pattern could be observed from such drones.
According to the Army, a final decision on the new camouflage will be made no later than 2022. In 2027, the new camouflage uniform will be fully implemented.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical assault vest manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
The US military spends tens of millions of dollars each year on the research and development of new military products. Every day, new inventions are brought to life through military research and development, from the behind-the-scenes labour that tracks what's needed, to the science that makes the military product feasible, to prototypes and field testing.
What we don't realize, though, is how many ordinary things began this way. The military products didn't invent these things, but that doesn't mean they stayed in the military. Many objects made it to widespread use, and the origins of many of them have since been forgotten.
Take a look at these common military goods that were brought to life by tax dollars and military research:
1. The sanitary napkins were invented in 1914.
2. In the 1930s, the popular Ray-Ban Aviator Sunglasses was invented.
3. Duct Tape and Super Glue were invented in 1942.
1. The sanitary napkins were invented in 1914.
Let us pay special tribute to pioneer women. Before the 1920s, the majority of what was available was homemade. Cotton pads were first introduced during WWI as military product, but a cotton shortage prompted the Kimberly-Clark Company to develop cellucotton, an absorbent material produced from wood pulp. Originally designed for bandages, nurses in the Red Cross recognized their usefulness and began using them during Aunt Flo's visits.
Kimberly-Clark began producing and marketing cellucotton sanitary napkins after the war ended. Because of the nature of the product's use, many businesses refused to stock it, but sanitary napkins became readily available to the general public instead of only military product within a few years.
2. In the 1930s, the popular Ray-Ban Aviator Sunglasses was invented.
As military pilots reached unprecedented altitudes, they realized they needed military product -- sunglasses to protect them from the strong glare. The US Army Air Corps hired Bausch & Lomb to design aviator goggles with their trademark shape and lens material that successfully filtered out the light.
However, the product was not excluded; in 1937, they re-branded a pair of sunglasses as “Ray-Bans” (banning the rays) and sold them to civilians.
By the end of the 1930s, as military products, all soldiers were issued a pair, and the civilian populace could purchase them as well.
3.Duct Tape and Super Glue were invented in 1942.
Duct Tape was another WWII invention of military product. Johnson & Johnson Co. developed it in response to a request from the military for an adhesive that could resist harsh environments. Their first invention was dubbed "duck tape" because it was waterproof. It was frequently utilized by civilians after the war, most commonly to seal ducts. It was renamed Duct Tape and rebranded in silver to match modern heating and air conditioning systems.
During World War II, Super Glue made its appearance as well. When Eastman Kodak was looking for a compound to utilize on plastic rifle sights, they came up with this compound. It was created by chance and was found to be too sticky to use.
It was rediscovered nearly a decade later and discovered to have enormous commercial potential. It was first sold to the general public in 1958, and physicians used it to swiftly seal open wounds during the Vietnam War.
Litai (Quanzhou) Bags Corp., Ltd. is a professional military-related products manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at choly@lqcompany.com or phone at 86-15260869531.