An assault vest is a protective garment composed of Kevlar that is worn on the body to protect it from bullets and shrapnel. Hard bulletproof vests are used in military combat, hostage rescue missions, counter-terrorism, counter-insurgency, and high-risk tactical missions, while soft bulletproof vests are used in military combat, hostage rescue missions, counter-terrorism, counter-insurgency, and high-risk tactical missions. Ceramic plates can be mounted to assault vests for added protection. As a result of the global growth in terrorism, particularly in the Middle East and Asia-Pacific, countries are updating their combat weapons.
Here is the content list:
1.The display of the assault vest.
2.The features of the assault vest.
3.How To Put On A Plate Carrier Vest?
• Decompression padded shoulder strap: reduce the shoulder discomfort when carrying weight
• Laser-cut molle system: for hanging extra accessories/ pouch
• Encryption 600D Oxford fabric: with high firmness, soft lustre, good water resistance, etc.
• 5mm thick mesh sponge pads: to relieve the pressure on the back
• Quick-release steel wire: penetrates the front and rear to form a one-handed quick release system
• Hollow waist elastic band: reduce the restraint on the waist, breathable and comfortable
• Thick webbing molle system: for hanging extra accessories/ pouch
• Laser cut molle system;
• One hand quick Release, weight vest for training
• Suitable for Paintball, airsoft game protection
• Adjustable shoulder strap, waist and tensional bands fitting different body size;
• Fits men and women's tactical weight vest
• Can carry bullet plate in front and backside
• Magic tape in the front to stick logo patches
Before putting on your plate carrier, always start by putting the weight training or ballistic plates you'll be utilizing inside. Then, on the outside of the vest, install any MOLLE attachments you require. Follow these guidelines to appropriately fit the load-bearing gear to your body once you've loaded up your plate carrier:
• Center the front plate on your torso.
• Adjust the shoulder straps so the top of the front plate aligns with your sternal notch, where your collarbone meets your sternum.
• Make sure both shoulder straps are even so the plates lie straight.
• Tighten the side straps for a snug fit.
• Use a mirror or ask a friend to check that the back plate's placement aligns with the front plate.
• Tug on your plate carrier to test its security.
• Move around, lift your arms in the air, twist your torso and bend over to make sure the carrier moves with your body without shifting.
• If the assault vest does shift, tighten the straps and adjust any additional accessories you have attached that interfere with the weight distribution and fit.
Litai (Quanzhou) Bags Corp., Ltd.., established in 2019, is a professional manufacturer engaged in the research, development, production, sale and service of the military backpack, gun bag, assault vest, hiking backpack and military pouches. Litai aims to provide customers with more diversified product quality, more convenient human services, seize opportunities and meet challenges, and become the mainstay of the bag industry. If you have any questions, please contact us via email at firstname.lastname@example.org or phone at 86-15260869531.
The Chinese People's Liberation Army (PLA) Xinjiang Military Command, which is stationed in China's high-altitude western areas, has confirmed that it has received three new advanced weaponry systems in the last week, including armoured vehicles and artillery pieces, as analysts predicted on Sunday.
Here is the content list:
1. A new type of armoured assault vehicle has been revealed.
2. Newly delivered new-type, four-wheeled self-propelled howitzer.
3. New self-propelled heavy rocket launchers have gone into service
A video news website linked with the PLA stated on Sunday that dozens of a new type of armoured assault vehicle had recently entered duty with a PLA Xinjiang Military Command unit deployed in a snowy plateau region at an elevation of more than 4,500 meters.
According to the clip, the eight-wheeled armoured vehicles come in a variety of configurations, including those with big calibre rifled equipment, autocannons, machine guns, and howitzer systems.
A new-type, four-wheeled self-propelled howitzer was recently handed to a group that recently completed its first live-fire target practice deep in the Karakorum Mountains at an altitude of 4,500 meters, according to China Central Television (CCTV).
In addition, a unit deployed in a snow-covered region at an elevation of more than 5,200 meters recently received a batch of new self-propelled heavy rocket launchers that are highly mobile, fast-reacting, highly accurate, very deadly, and jamming-resistant, according to a separate CCTV report on May 8.
According to Shanghai-based news website, the Type 08 armoured vehicle, a 122mm-calibre self-propelled howitzer that incorporates technologies from the PCL-181 155mm-calibre self-propelled howitzer, and the PHL-03 long-range multiple rocket launcher systems are the three new military equipment systems.
According to a Chinese military affairs analyst who requested anonymity, the PLA's high-altitude troops are gaining enhanced mobility and firepower by upgrading their arsenal with the latest military equipment systems, allowing them to better fulfill their missions in safeguarding the country's sovereignty and territorial integrity.
Observers say the PLA Xinjiang Military Command has been commissioning a variety of modern weaponry during the last year. The command got the first batch of newly designed Type 15 light tanks in early 2021, according to analysts, which excel at rapid reaction fighting in plateau regions.
Official reports also reveal other new military equipment systems, such as the PLC-181 howitzer and third-generation Mengshi assault vehicles, according to eastday.com. According to analysts, these are developing a complete, modern ground warfare system that is particularly important for plateau battles.
Litai (Quanzhou) Bags Corp., Ltd. is a professional military-related equipment manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at email@example.com or phone at 86-15260869531.
The new tactical assault vests are an improved version of, and a replacement for, traditional tactical assault vests. The tactical assault vests' performance was greatly improved thanks to the new tactics.
Here is the content list of this article:
1.What are the basic features of new tactical assault vests?
2.What is the key design of new tactical assault vests?
3.How does the new tactical assault vest on the female model?
A Medium tactical assault vest weighs 3.6 pounds (1.6 kg), which is less than a Medium old tactical assault vest but offers additional coverage. A fully equipped tactical assault vest, with all of its components (soft armour panel inserts, four ballistic plate inserts (front, back, and two side plates), collar, and groin guards), weighs 30 pounds (14 kg), with a Large tactical assault vest weighing around 35 pounds (16 kg). The tactical assault vest incorporates the capability of the enhanced side ballistic inserts, which give coverage under the arms and down the sides of the torso.
The tactical assault vest allows you to wear the vest in two different ways. The first is to simply pull the vest down over the wearer's head, and the second is to loosen fasteners on the wearer's left shoulder and slide into the right-hand vest. The wearer then lifts the front panel of the vest and fastens the waistband, which reduces the weight of the vest off the shoulders considerably, and then fastens the side protection modules to complete the operation for both techniques.
The tactical assault vest's complete armour system may be removed with the pull of a secret lanyard, which is a crucial design element. The armour then disintegrates into its parts, allowing the wearer to flee if he or she falls into water or becomes stuck in a dangerous location. The secret release lanyard also makes it easier for medical workers to get to a casualty, which was an issue with the earlier Interceptor armour.
On the front, back, and sides, there's a grid of PALS webbing for attaching modular pouches and attachments like neck and throat protection, groin protection, and deltoid protection.
A female-specific version of the tactical assault vest (F-tactical assault vest) was developed in response to the increased number of female soldiers in the army. Women in warfare were formerly supplied with standard tactical vests. Women's movement was restricted in ways such as stooping over, getting in and out of tight locations, and putting their guns against their shoulders, according to Army personnel. When they sat down, the long armour plates within the vests would brush against their hips and slash into their thighs. In 2009, work on a model for women began. The Army developed a vest that is shorter to suit smaller torsos and has tailoring to fit closer to women's chests after extensive testing and measurements. The new vest has no gaps between the material and the body, and it can be customized with smaller side ballistic inserts for smaller waist sizes. The vest is lighter than the male vest because it does not sit on the shoulders of the female soldier. In September 2012, the first female soldier vests were issued to soldiers going to Afghanistan.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical assault vest manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at firstname.lastname@example.org or phone at 86-15260869531.
The transfer of military weapons and equipment to civilian police has resumed in the first quarter of 2021, following a drop in the last three quarters of 2020 due to a nationwide focus on policing.
According to Stephen Semler, co-founder of the Security Policy Reform Institute, an analysis of data from the Defense Logistics Agency found that the value of military equipment transferred under the 1033 Program reached levels not seen since before former Minneapolis police officer Derek Chauvin killed George Floyd in the first quarter of this year.
Here is the content list:
1. Biden’s policy：the military equipment police have received through the 1033 program.
2. Biden could curtail the program.
3. The military equipment in the 1033 program is on a conditional loan which can be taken back.
“The military equipment police have received through the 1033 program is now Biden’s policy,” Semler wrote in his newsletter. “By him not doing anything about it makes it Biden’s problem.”
Local and state police departments obtain military equipment from the Defense Department for free under the 1033 Program, however, they must cover the costs of transportation and maintenance. According to a memorandum of agreement that the ACLU claims are consistent across all states, the Defense Logistics Agency requires law enforcement agencies to put army equipment received under the 1033 Program into operation within one year and use it for a minimum of a year.
President Barack Obama signed an executive order in 2015 prohibiting the transfer of tracked armoured vehicles, weaponized aircraft, firearms with a calibre of.50 calibre or greater, bayonets, grenade launchers, and camouflage outfits other than woodland and desert designs or plain colours. In 2017, President Trump revoked that presidential order.
According to Semler, one move Biden may take is to recall military gear that has been provided to police and to block further transfers.
“The military gear that flows through 1033 is on a conditional loan, the matériel can be taken back,” Semler wrote. “Biden can order it to be done himself, without Congress.”
Some members of the House of Legislators attempted to stop the program with an amendment in 2014, but it was defeated by representatives who, on average, received more campaign money from PACs and employees of Department of Defense contractors than those who supported it. Because the program authorizes the Defense Logistics Agency to purchase military equipment for the purpose of transferring it to police, it helps Department of Defense contractors. “36 percent of the military equipment transferred under the scheme is brand new,” according to the ACLU's 2014 study.
The National Sheriff's Association, which is funded by telecom corporations such as Verizon Connect and AT&T FirstNet, has also aided police agencies in obtaining military equipment. The National Sheriff's Association wants Congress to formalize the 1033 Military Surplus Program so that presidential orders can't easily limit it.
Litai (Quanzhou) Bags Corp., Ltd. is a professional military-related products manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at email@example.com or phone at 86-15260869531.