





Everyone agrees that it is necessary to get a rifle bag so let’s look at a brief history of the rifle bag and find out what has changed over the years.
Here are the content lists:
1. It all began in the old west.
2. Today’s Soft Rifle bags.
3. Soft rifle bags offer some distinct advantages.
In the 1830s, the first full-length rifle bags developed, mostly to protect the rifle.
They were sewed across the main seam and ornamented with fringes by American Indians from a single piece of deer or elk hide that covered the entire weapon. Early frontiersmen exchanged for these protective bags because they recognized the importance of their rifles.
While these early bags performed a fine job of securing the rifles, they did nothing to aid Plainsmen in their horseback transit. They were obliged to balance them on the saddle pommel until someone devised a leather sleeve called a horn loop that was fastened to the saddle horn and allowed the rifle to be inserted muzzle down.
The rifle could now travel with the saddle horn, but it had lost much of its protection. The saddle scabbard was not invented until after the Civil War, about 1870, making transit and protection conceivable.
The rifle could be carried with the butt forward thanks to the full-length leather sheath linked to the pommel and the back of the saddle. Anyone who has watched reruns of riflesmoke, Wagon Train, or any other TV western from the 1950s and 1960s has seen a saddle scabbard in some form.
The more things change, the more they stay the same, as someone once said. It's the same with rifle casings. Even if you aren't hunting buffalo on the western plains, you still need the same features in your rifle bag: protection and portability.
Rifle owners are passionate about their firearms and the activities they participate in. They want to be able to attend their favorite events while also ensuring that their prized rifles are safe.
The main advantage of soft rifle bags is that they are lightweight and easy to carry, which is something that every shooting competitor appreciates. For those rainy days on the range, a soft bag's water resistance is another benefit.
One of the knocks on soft bags in the past was that they couldn't secure a rifle as well as a hard bag. Let's face it, you don't want your weapon to move around in its bag. However, there are now twin soft bags with three interior straps, such as ours, that you may customize to keep your weapon secured and secure.
There are also tactical rifle bags that allow you to use barrel and rifle retention methods to secure your rifle's buttstock. Our rifle bag is one of the few on the market with a removable divider that also functions as a rifle mat.
Overall, soft bags have progressed significantly. They give the versatility of zippered compartments to carry ammo, magazines, cleaning equipment, and even storage for your small weapons, in addition to providing more secure transit for your rifle.
A good rifle bag can keep your weapon protected while offering all the convenient features you need. Litai (Quanzhou) Bags Corp., Ltd. is a professional rifle bag manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at choly@lqcompany.com or phone at 86-15260869531.
Litai (Quanzhou) Bags Corp., Ltd.., established in 2019, is a professional manufacturer engaged in the research, development, production, sale and service of military backpack, gun bag, tactical vest, hiking backpack and military pouches. We are located in Quanzhou City with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment including leather grinding machine, pattern sewing machine, flatness sewing machine, flatlock stitching machine. In addition, we are selling well in all cities and states around the United States, our products are also exported to clients in such countries and regions as North America, South America, Europe and south Africa. We also welcome O E M and O D M orders. We have good products and professional sales and technical teams. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. Litai aims to provide customers with more diversified product quality, more convenient human services, seize opportunities and meet challenges, and become the mainstay of the domestic bag industry. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.
The new tactical assault vests are an improved version of, and a replacement for, traditional tactical assault vests. The tactical assault vests' performance was greatly improved thanks to the new tactics.
Here is the content list of this article:
1.What are the basic features of new tactical assault vests?
2.What is the key design of new tactical assault vests?
3.How does the new tactical assault vest on the female model?
A Medium tactical assault vest weighs 3.6 pounds (1.6 kg), which is less than a Medium old tactical assault vest but offers additional coverage. A fully equipped tactical assault vest, with all of its components (soft armour panel inserts, four ballistic plate inserts (front, back, and two side plates), collar, and groin guards), weighs 30 pounds (14 kg), with a Large tactical assault vest weighing around 35 pounds (16 kg). The tactical assault vest incorporates the capability of the enhanced side ballistic inserts, which give coverage under the arms and down the sides of the torso.
The tactical assault vest allows you to wear the vest in two different ways. The first is to simply pull the vest down over the wearer's head, and the second is to loosen fasteners on the wearer's left shoulder and slide into the right-hand vest. The wearer then lifts the front panel of the vest and fastens the waistband, which reduces the weight of the vest off the shoulders considerably, and then fastens the side protection modules to complete the operation for both techniques.
The tactical assault vest's complete armour system may be removed with the pull of a secret lanyard, which is a crucial design element. The armour then disintegrates into its parts, allowing the wearer to flee if he or she falls into water or becomes stuck in a dangerous location. The secret release lanyard also makes it easier for medical workers to get to a casualty, which was an issue with the earlier Interceptor armour.
On the front, back, and sides, there's a grid of PALS webbing for attaching modular pouches and attachments like neck and throat protection, groin protection, and deltoid protection.
A female-specific version of the tactical assault vest (F-tactical assault vest) was developed in response to the increased number of female soldiers in the army. Women in warfare were formerly supplied with standard tactical vests. Women's movement was restricted in ways such as stooping over, getting in and out of tight locations, and putting their guns against their shoulders, according to Army personnel. When they sat down, the long armour plates within the vests would brush against their hips and slash into their thighs. In 2009, work on a model for women began. The Army developed a vest that is shorter to suit smaller torsos and has tailoring to fit closer to women's chests after extensive testing and measurements. The new vest has no gaps between the material and the body, and it can be customized with smaller side ballistic inserts for smaller waist sizes. The vest is lighter than the male vest because it does not sit on the shoulders of the female soldier. In September 2012, the first female soldier vests were issued to soldiers going to Afghanistan.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical assault vest manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at choly@lqcompany.com or phone at 86-15260869531.
As part of its effort to upgrade the equipment supplied to its soldiers, the Canadian Army is looking for a new tactical assault vest/load carriage system.
Army officials told Esprit de Corps that a Request for Proposals will be released to the industry sometime this fall.
Here are the content lists:
1.What are the current tactical assault vest design and drawbacks?
2.What’s the bidding document Canadian Army officials will have on the new tactical assault vest?
3.What about the Canadian Army’s results of its testing of a new camouflage pattern?
The current tactical assault vest was developed in the 1990s based on the experiences of the Canadian Armed Forces in the Balkans. That design anticipated soldiers would uniformly carry minimum equipment, however, it is widely known that the present vest is disliked by troops, who often respond by purchasing their similar equipment.
Before departing his role as Director of Soldier Systems for the Canadian Army's Directorate of Land Requirements in July, Lt.-Col. Ray Corby openly admitted that the present vest is no longer enough to suit soldiers' needs. According to Army officials, polls done by Defence Research and Development Canada suggest that the assault vest is at the top of the list of equipment that soldiers want to see replaced. The lack of modularity in the existing vest is cited by the majority of soldiers as the primary source of their dissatisfaction.
According to Canadian Army officials, the Requests for Proposals for the new load-carrying system would be specially worded to stimulate sector inventiveness. The bid package will specify what troops must do, what they must carry, and where they must operate, as well as give industry latitude in determining how new technology might fulfill those responsibilities. The new equipment is planned to be delivered in 2022.
Small amounts of equipment might be acquired at the start, with adjustments made later, according to Corby. “We want to show that as an Army, we can rapidly and efficiently trial and choose equipment so that we can take advantage of industry improvements in the future,” he said. “We are not searching for a solution that will last 20 to 30 years. Every five years or so, we'd want a taste of the greatest for those who need to keep an edge on the battlefield.”
New load carriage system selection trials are slated for next summer, with a cross-section of soldiers from a variety of Canadian Army trades evaluating industry prototypes. According to Army officials, the idea is to create a modular system that will allow soldiers to customize their equipment based on their employment and body type. Aside from modularity, another important issue to consider is "load management," which refers to the total weight of all the equipment a soldier must carry. Overburdening soldiers has the unintended consequence of slowing them down.
The results of the Canadian Army's testing of a new camouflage design, on the other hand, have yet to be released. In September 2019, troops from the 2nd Canadian Mechanized Brigade Group in Petawawa began testing a new disruptive pattern. The soldiers were largely from the 3rd Battalion, Royal Canadian Regiment. The bulk of soldiers wore the “Prototype “J” pattern.
According to the Canadian Army, the trial lasted about six months and finished in February 2020, producing a wealth of relevant data. In addition, Prototype J is still worn by members of the Battalion. Uniforms, a soft field cap, helmet covers, and fragmentation vest covers were supplied to the troops participating in the Prototype J camouflage tests.
Uninhabited aerial vehicles were utilized in some of the tests to assess how far the new pattern could be observed from such drones.
According to the Army, a final decision on the new camouflage will be made no later than 2022. In 2027, the new camouflage uniform will be fully implemented.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical assault vest manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.