





The proper technique to load your military backpack is determined by two factors: your objective and your comfort. You must be able to store all you require and carry it easily, therefore you must begin with the appropriate equipment. Your final decision should be based on the specific needs of your mission.
A military backpack is an important piece of equipment, and this article will focus on three points:
1. The features that come standard in any quality military backpack.
2. What to pack in your military backpack?
3. How to pack a military backpack?
• Roomy main storage area
• Zippered outer pockets
• Reinforced grab-and-go handles
• MOLLE or 5.11 webbing platform
• Interior mesh pockets and gear-specific compartments
• Water-repellent coating
• External compression straps
• Internal hydration compartment
The contents of your military bag are determined by your mission. For a day at the range, you'll need different gear than you would for a week or more in the field, but there are a few essentials that everyone should have. The following are the essential things for a tactical pack:
• First aid kit or IFAK pouch
• Food, including high-protein, energy-boosting snacks
• Personal hygiene items
• Tools
• Water
If you’re packing a survival backpack, you’ll also need these basic items:
• Bedding
• Clothing
• Communication equipment
• Defence items
• Fire-starting kit
• Flashlights
• Shelter
Consider packing a 24-hour military bag in the same way you would a pyramid. Heavy objects should be on the bottom, medium-weight goods should go in the middle, and light goods should go on top. This is the best position for your back and usually the most convenient to carry, especially if you're going on a long hike.
For items, you need to reach frequently or easily, such as flashlights, a tactical knife or multitool, radios, and your first aid kit, use the exterior compartments of your pack or MOLLE attachments.
• The foundation: packing the bottom of your bag: The bottom of your pack is for things you'll only use once you've finished carrying it for the day. All of your heavier pieces of gear, such as entrenching tools, belong on the bottom, along with your bedding, extra clothing, and most of your hygiene stuff.
• The in-between gear: In the middle of your bag, put your shelter half, poncho liner, or whatever else you'll need to set up camp for the night. Extra food, water, and other goods you won't need while on the trip can all be stored in the middle of your backpack.
• What to pack on the top of your military backpack: Keep a spare pair of socks, a poncho, self-defence equipment, and navigation gear on the top layer of your bag for easy access. Snacks for mid-mission, water purification tablets, and other minor goods are also appropriate.
• Gear to attach to the outside of your pack: Make the most of your military backpack's 5.11 SlickStick or MOLLE compatibility, such as the All Hazards Nitro Backpack 12L. Canteens, first-aid supplies, eye and ear protection, holsters, and other necessities can all be attached to the compact webbing platform.
Litai (Quanzhou) Bags Corp., Ltd. is a professional military backpack manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
The Improved Outer Tactical Vest (IOTV) is an improved version of the earlier Outer Tactical Vest (OTV) form of the Interceptor Body armour, as fielded by the US Army. The Deltoid and Auxiliary Protector System (DAPS) components, ESAPI (Enhanced Small Arms Protective Insert), Enhanced Side Ballistic Inserts (ESBI), and the OTV's groin protector are all compatible with the IOTV.
Here are the content lists:
1. Why IOTV is better than traditional OTV?
2. What is the background of the improved outer tactical vest?
3. What is the effectiveness of the IOTV?
The OTV design was deemed insufficient and weak in several areas, prompting the creation and deployment of the IOTV. Point Blank Body armour, BAE Systems, KDH Defense Systems, Protective Products Enterprises, UNICOR, and Creative Apparel Associates are actively producing the IOTV. From mid-2007 forward, the IOTV first saw battle with US Army ground combat units, and it is still the basic body armour type deployed by regular US Army ground combat troops overseas.
While the Interceptor Body armour and the Outer Tactical Vest were thought to be fairly effective, others questioned if they were the greatest feasible armour solution for US military forces. The controversy surrounding Dragon Skin, which was created by the now-defunct Pinnacle armour, heightened the argument. Various assertions appeared that Dragon Skin was more successful at shielding soldiers than the then-standard issue Interceptor body armour system, with independent studies and reports appearing to back these claims, prompting various congressional members to request more investigation. In response, the military released public testing results that revealed widespread flaws in the Dragon Skin armour's testing. Dragon Skin was never widely adopted, and several of the Outer Tactical Vest's identified flaws, such as quality of protection and modularity, were rectified in the Improved Outer Tactical Vest and E-SAPI plates.
The Improved Outer Tactical Vest is an advance over earlier US body armour systems, with the Vietnam War-era fragmentation vest limited to fragmentation protection, the PASGT vest limited to pistol bullets, and the prior Outer Tactical Vest unable to stop armour-piercing shots.
The Army has continued to develop the IOTV with additional features in response to troop input on the effectiveness of the armour system, with Generation III including a more intuitive rapid release system and the new Operational Camouflage Pattern (OCP). Body armour conversion kits have been given at a lesser cost to bring earlier Generation armour sets up to newer requirements, rather than constructing fully new IOTV armour sets.
Litai (Quanzhou) Bags Corporation, which is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. Whether selecting a current product from our catalogue or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. If you have any needs or questions about the tactical vest, please contact us.
As part of its effort to upgrade the equipment supplied to its soldiers, the Canadian Army is looking for a new tactical assault vest/load carriage system.
Army officials told Esprit de Corps that a Request for Proposals will be released to the industry sometime this fall.
Here are the content lists:
1.What are the current tactical assault vest design and drawbacks?
2.What’s the bidding document Canadian Army officials will have on the new tactical assault vest?
3.What about the Canadian Army’s results of its testing of a new camouflage pattern?
The current tactical assault vest was developed in the 1990s based on the experiences of the Canadian Armed Forces in the Balkans. That design anticipated soldiers would uniformly carry minimum equipment, however, it is widely known that the present vest is disliked by troops, who often respond by purchasing their similar equipment.
Before departing his role as Director of Soldier Systems for the Canadian Army's Directorate of Land Requirements in July, Lt.-Col. Ray Corby openly admitted that the present vest is no longer enough to suit soldiers' needs. According to Army officials, polls done by Defence Research and Development Canada suggest that the assault vest is at the top of the list of equipment that soldiers want to see replaced. The lack of modularity in the existing vest is cited by the majority of soldiers as the primary source of their dissatisfaction.
According to Canadian Army officials, the Requests for Proposals for the new load-carrying system would be specially worded to stimulate sector inventiveness. The bid package will specify what troops must do, what they must carry, and where they must operate, as well as give industry latitude in determining how new technology might fulfill those responsibilities. The new equipment is planned to be delivered in 2022.
Small amounts of equipment might be acquired at the start, with adjustments made later, according to Corby. “We want to show that as an Army, we can rapidly and efficiently trial and choose equipment so that we can take advantage of industry improvements in the future,” he said. “We are not searching for a solution that will last 20 to 30 years. Every five years or so, we'd want a taste of the greatest for those who need to keep an edge on the battlefield.”
New load carriage system selection trials are slated for next summer, with a cross-section of soldiers from a variety of Canadian Army trades evaluating industry prototypes. According to Army officials, the idea is to create a modular system that will allow soldiers to customize their equipment based on their employment and body type. Aside from modularity, another important issue to consider is "load management," which refers to the total weight of all the equipment a soldier must carry. Overburdening soldiers has the unintended consequence of slowing them down.
The results of the Canadian Army's testing of a new camouflage design, on the other hand, have yet to be released. In September 2019, troops from the 2nd Canadian Mechanized Brigade Group in Petawawa began testing a new disruptive pattern. The soldiers were largely from the 3rd Battalion, Royal Canadian Regiment. The bulk of soldiers wore the “Prototype “J” pattern.
According to the Canadian Army, the trial lasted about six months and finished in February 2020, producing a wealth of relevant data. In addition, Prototype J is still worn by members of the Battalion. Uniforms, a soft field cap, helmet covers, and fragmentation vest covers were supplied to the troops participating in the Prototype J camouflage tests.
Uninhabited aerial vehicles were utilized in some of the tests to assess how far the new pattern could be observed from such drones.
According to the Army, a final decision on the new camouflage will be made no later than 2022. In 2027, the new camouflage uniform will be fully implemented.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical assault vest manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
Assault vests are now worn for a variety of reasons. Assault vests are worn by soldiers, law enforcement officers, and survivalists for a variety of reasons. An attack vest is a tough and durable vest that is worn over conventional clothing to defend the wearer from potential threats. When on missions or when carrying equipment, most people wear assault vests. For a variety of reasons, a military-spec assault vest is beneficial.
Most assault vests are fully adjustable and include a sidearm holster, up to six holders for rifle magazines, up to four pistol magazines, a pocket for shotgun shells, Velcro for attaching further compartments, and a radio compartment. They can also be ordered with a two-pistol magazine belt looped through the bottom of the vest. There are many different types of attack vests on the market, but here is what a typical vest will contain.
Assault vests were not supposed to be worn all day on the homestead, but rather for certain events. The advantages of an attack vest are straightforward: you have everything you need at your fingertips, and it's in a comfortable load-carrying "vehicle" with ideal weight distribution. It's for convenience, gear customization, and fast muscle memory practice under stressful conditions.
1. One of the most obvious advantages of an assault vest is that it keeps all of your gear in front of you on your body. You have quick access to your sidearm, as well as a radio and all of the ammunition you'll need. Yes, this is going to be a lot of work. Is there, however, any tactical setup that isn't?
2. Having a sidearm is a big advantage of assault vests. You'll have quick access to it, and it'll be securely secured in the holster. Unlike a belt or drop-leg holster, your sidearm is kept out of the way by sitting on your torso.
3. Another advantage of the assault vest is the quick access to spare rifle magazines. You have five or six extra magazines in your possession, which is more than plenty when you need them.
4. Most assault vests have webbing on the front, sides, and back that may be used to attach or put different compartments and packs, boosting their adaptability.
5. Assault vests are also quite simple to put on and take off. They're not as uncomfortable to wear as some other combinations. Simply slip it over your shoulders and zip it up to wear it like a vest. You can tighten or loosen it on the sides if necessary. As a result, assault vests are quite comfortable to wear.
A good assault vest can be extremely useful in some situations, while most people will concede that it is a specialized piece of equipment. If you need a configuration to carry a lot of gear and equipment, assault vests are a great option. There are so many advantages to owning an assault vest that if you can afford it, you should do so.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical assault vest manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.