





Thousands of men and women across the country put on a bulletproof tactical vest, gun, and badge to safeguard our country or a little portion of it. Outer vests are getting increasingly popular, and it's not just because they look cool. They relieve the strain placed on your back by a heavy pistol belt. The key weapons and attachments have been moved to the outer vest, making them easier to grasp when needed. You've come to the right place if you're new to tactical vests and how to set them up.
Here is the content list:
1. Why tactical vest size matters?
2. Consider what you’ll be carrying when you attach things to your tactical vest.
3. Additional thoughts on where to place gear on your vest.
The fit and size of your tactical vest are perhaps the most crucial aspect of its setup. If your vest doesn't fit properly, it won't be comfortable, and its effectiveness may suffer as a result. The rigging could be sagging or excessively tight. It's crucial to have your measurements taken by someone who knows how to fit tactical vests. Unless you're buying a vest for personal reasons rather than professional, most vests come with plate carriers, so there's no need to worry about picking the wrong one.
Tactical vests are customizable, allowing you to customize yours for the best comfort and safety. It's ready to wear once you've tailored it to fit you, and all you have to do now is put it on and secure it with Velcro or whatever closure it has.
If you wear a vest to work and your department provides you with an outer carrier, it will normally also include a standard vest carrier. Because you have both carrier systems, you can switch your plates between them based on the uniform you're wearing.
One of the great features of an outer carrier is that it may be adjusted during your shift. If it's particularly hot outside, you can also remove it from time to time. Of course, you must be cautious about when and where you remove your vest.
The first thing to keep in mind is that the plate carrier not only holds the load carriage but also the armour system. The armour is important for how the vest fits since it prevents the vest from drooping as you add pouches and objects.
Outer attachments allow you to carry additional essential gear that would otherwise be too large to fit on your waist. You can carry numerous items on your vest, including a taser, baton, notebook, keys, and flashlight. When you're putting things in your vest carrier, make sure they're in logical places so you can get to what you need fast. It's not required to use every available attachment slot.
The armour plates alone are quite hefty, and the load will only get greater as you add plate carrier accessories. When you add goods and pouches to the front of your vest carrier, you're increasing the chances of snagging it on something.
If you put bulky objects and pouches on top of your magazines, you might not be able to get to them. When mounting pouches, keep in mind that they shouldn't get in the way of getting to your holster or other items on your belt.
You want to keep your shoulders clear when adding items to your vest carrier. You can block shots and transition from your weak side if you keep this region clear. Make sure that nothing is mounted in a way that prevents you from shouldering firearms. Communication equipment and hydration tubes should be routed in such a way that they don't become a snagging hazard or get in the way.
It's also crucial to keep the load on your vest balanced. Normally, you'd want to carry more goods on your weak side so that you can use your dominant hand to access them. You should, however, place some items in the center to distribute the weight you're carrying.
The way you conduct your job and respond to dangers depends on how well you set up your tactical vest. It's particularly crucial if you're going to wear a vest for outside activities. Outer vests allow you to carry additional essential gear while also relieving stress on your gun belt. If you follow these instructions for setting up your vest, you should be able to be comfortable while also having access to your gear when you need it.
If you have any questions, please contact us via email at choly@lqcompany.com or phone at 86-15260869531.
Tactical clothing originated as a military requirement and has since evolved into a popular choice of attire for people looking to play the EDC card or simply look the part. Tactical gear has been modified for civilian usage, from backpacks to boots, and at ever-higher quality levels.
Here is the content list:
1. Boots
2. Body armour
3. Tactical backpacks
Operators require a high level of mobility. Boots are one of the most crucial commodities for mobile providers.
A well-designed and well-built pair of tactical boots allow the wearer to cross a variety of terrain with little strain and risk of injury. A good pair of boots will always steer you in the proper path, whether you're attacking or retreating.
Proper boots would have the following characteristics:
• Lightweight design
• Durability
• Waterproofing
• Breathability
The increasing and publicly publicized prevalence of active shooter scenarios around the world can be credited with raising everyone's awareness of the critical function body armour plays in saving lives.
Modern body armour is so adaptable that it may be put into a plate carrier or slid into special pockets on tactical shirts and vests.
The ability of body armour to stop specific types of bullets is graded. The National Institute of Justice in the United States assigns the scores (NIJ). The NIJ rating system has five levels.
• LEVEL IIA Low-velocity 9mm and.40 calibre pistol bullets can be stopped.
• LEVEL II protects against bullets of larger calibre and velocity, ranging from 9mm to.357 magnums.
• LEVEL IIIA Stops shots with a calibre of up to.44 magnum. This is a thicker, heavier degree of body armour with a long-lasting feel. Kevlar shields and other non-wearable bulletproof tools commonly use Level IIIA armour.
• LEVEL III Capable of stopping rifle shots, including 7.62 mm bullets from an AK-47. Level III armour is significantly thicker and heavier than Level II armour since it is often comprised of hard plates.
• LEVEL IV Stops armour-piercing bullets up to.30 calibre from penetrating. Thick hard plates designed to mount to a carrier are typically used to achieve this capability.
• LEVEL IV armour is so hefty that only operators with appropriate strength and endurance can utilize it. It's designed for war or tense gunfights.
In recent years, the market for tactical backpacks for both operators and civilians has exploded.
From MOLLE webbing to moral-patch Velcro, these backpacks have a lot in common, no matter who they're sold to. Tactical backpacks, for example, virtually always include straps for carrying guns.
They're also usually equipped with covert zipper pockets for concealed weaponry.
These bags all have the same deep organizational capacity, which means they can hold a lot of things. They may also have expansion capabilities and storage areas for water bladders and body armour plates.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical gear manufacturer that provides both OEM and ODM orders. We have our overseas warehouse, and our business model has shifted from a single product maker to providing system integration services, resulting in a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
As part of its effort to upgrade the equipment supplied to its soldiers, the Canadian Army is looking for a new tactical assault vest/load carriage system.
Army officials told Esprit de Corps that a Request for Proposals will be released to the industry sometime this fall.
Here are the content lists:
1.What are the current tactical assault vest design and drawbacks?
2.What’s the bidding document Canadian Army officials will have on the new tactical assault vest?
3.What about the Canadian Army’s results of its testing of a new camouflage pattern?
The current tactical assault vest was developed in the 1990s based on the experiences of the Canadian Armed Forces in the Balkans. That design anticipated soldiers would uniformly carry minimum equipment, however, it is widely known that the present vest is disliked by troops, who often respond by purchasing their similar equipment.
Before departing his role as Director of Soldier Systems for the Canadian Army's Directorate of Land Requirements in July, Lt.-Col. Ray Corby openly admitted that the present vest is no longer enough to suit soldiers' needs. According to Army officials, polls done by Defence Research and Development Canada suggest that the assault vest is at the top of the list of equipment that soldiers want to see replaced. The lack of modularity in the existing vest is cited by the majority of soldiers as the primary source of their dissatisfaction.
According to Canadian Army officials, the Requests for Proposals for the new load-carrying system would be specially worded to stimulate sector inventiveness. The bid package will specify what troops must do, what they must carry, and where they must operate, as well as give industry latitude in determining how new technology might fulfill those responsibilities. The new equipment is planned to be delivered in 2022.
Small amounts of equipment might be acquired at the start, with adjustments made later, according to Corby. “We want to show that as an Army, we can rapidly and efficiently trial and choose equipment so that we can take advantage of industry improvements in the future,” he said. “We are not searching for a solution that will last 20 to 30 years. Every five years or so, we'd want a taste of the greatest for those who need to keep an edge on the battlefield.”
New load carriage system selection trials are slated for next summer, with a cross-section of soldiers from a variety of Canadian Army trades evaluating industry prototypes. According to Army officials, the idea is to create a modular system that will allow soldiers to customize their equipment based on their employment and body type. Aside from modularity, another important issue to consider is "load management," which refers to the total weight of all the equipment a soldier must carry. Overburdening soldiers has the unintended consequence of slowing them down.
The results of the Canadian Army's testing of a new camouflage design, on the other hand, have yet to be released. In September 2019, troops from the 2nd Canadian Mechanized Brigade Group in Petawawa began testing a new disruptive pattern. The soldiers were largely from the 3rd Battalion, Royal Canadian Regiment. The bulk of soldiers wore the “Prototype “J” pattern.
According to the Canadian Army, the trial lasted about six months and finished in February 2020, producing a wealth of relevant data. In addition, Prototype J is still worn by members of the Battalion. Uniforms, a soft field cap, helmet covers, and fragmentation vest covers were supplied to the troops participating in the Prototype J camouflage tests.
Uninhabited aerial vehicles were utilized in some of the tests to assess how far the new pattern could be observed from such drones.
According to the Army, a final decision on the new camouflage will be made no later than 2022. In 2027, the new camouflage uniform will be fully implemented.
Litai (Quanzhou) Bags Corp., Ltd. is a professional tactical assault vest manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at daisy@lqtactical.com or phone at 86-15260869531.
Any survivalist, hunter, or law enforcement officer will appreciate a military product. This equipment is available to anyone who wants to be a hero. But this isn't to mean that you should throw yourself into danger at will. We should still leave this type of work to the pros. However, if we are faced with danger, disaster, or an extraterrestrial invasion, military equipment will undoubtedly assist us in surviving.Have fun and stay safe!
Following are content lists:
1. What is a military product?
2. Why do you need military product?
3. Military product development and design.
1. What is a military product?
military products are the tools that law enforcement, security, and military personnel use to carry out their responsibilities effectively.
Flashlights, pocket knives, protective vests, night-vision goggles, and navigation devices are just a few examples.
2. Why do you need military product?
‘Why do you need military equipment?' is the million-dollar question. One of the most important advantages that a military product may bring is safety. Helmets, military vests, and goggles will assist you to get to safety and may even save your life in extreme instances. ‘But isn't that the job of law enforcement and emergency services?' you might wonder. You are correct. However, having equipment that improves your chances of survival in case they aren't available for any reason isn't a bad idea! There's nothing wrong with military equipment. It's the same as having a smoke detector or a fire extinguisher in your home. You are in charge of your survival — or at the very least, you should struggle to live another day.
Military products make you more efficient and allow you to move swiftly, whether you're in law enforcement, training, or hunting. You can navigate quickly in the dark or in adverse weather to achieve your objectives. military apparel is also available, which is bright and comfortable and protects you from abrasion while trekking or camping.
Aside from its usefulness, military gear can also be fashionable and enjoyable to wear. We've compiled a list of military basics for your EDC list to assist you.
3. Military product development and design.
Datum3D has produced an exceedingly sophisticated Smart Container for the US Army using DFM&A methodologies. For design evaluation, the Competitive Benchmarking and Product Costing processes provided a thorough grasp of cost factors. We established critical baseline knowledge for the new product early on, as well as a thorough understanding of tooling costs and early supplier involvement.
We built a new Smart-Container for the US military with Datum3D client Erudite that was lightweight, collapsible, and tamper-proof. All aspects of the product development cycle have to be thoroughly managed and recorded for this project. Utilizing custom extrusions, we designed an entirely new outside frame and base, which we produced, tested and presented to the client using fast prototyping.
Because the containers needed to meet Air Transportability Test Loading Activity (ATTLA) regulation criteria, we focused on structural integrity and adaptability. These rules were put in place to ensure mobility and safety while maintaining combat quality.
Litai (Quanzhou) Bags Corp., Ltd. is a professional military-related products manufacturer that provides both OEM and ODM orders. We have an independent overseas warehouse, and the operation mode shifts from a single product manufacturer to provide system integration services, creating a business model innovation. If you have any questions, please contact us via email at 86-15260869531.